Process & Material
Titanium Grade 2 Small Hole EDM Drilling Thickness Review (20–50 Mm)
Titanium Grade 2 at 20–50 mm changes how Small Hole EDM must be supported, flushed, finished, and inspected. The controlling dimension is hole diameter, depth, depth-to-diameter ratio, straightness, breakthrough and flushing, not merely the outside stock size.
Quick Answer
For Small Hole EDM on Titanium Grade 2, treat 20–50 mm as a setup input rather than a guaranteed accuracy band. Confirm the real hole diameter, depth, depth-to-diameter ratio, straightness, breakthrough and flushing, material condition, datum, functional faces, and inspection method before assigning tolerance or finish.
Key Thickness Decisions
What This Thickness Range Means
Through-hole depth can create a moderate aspect ratio; flushing pressure, straightness and breakthrough must be planned together. On Titanium Grade 2, the supplied condition still changes support and surface response. This is the Small Hole EDM thickness decision; it does not turn the range into a machine promise.
Choosing the Right Setup
For Small Hole EDM on Titanium Grade 2 at 20–50 mm, plan electrode diameter, true path depth, aspect ratio, flushing, rotation, straightness, and breakthrough support. Then limit aggressive energy on fatigue faces, control recast or contamination, and keep post-process cleanliness explicit. Apply the tightest tolerance and finest finish only to the dimensions and faces that control function.
What to Watch For
At 20–50 mm, the failure is not simply “too thick” or “too deep.” Depth-to-diameter ratio becomes the main control. The electrode wears shorter and smaller as it advances, flushing pressure must carry debris through a long tube, and the exit can wander. Use guides, staged electrodes, and separate entry/exit position and diameter inspection. If the setup ignores that physical progression, the named feature can pass at the accessible face while failing at depth, at the exit, or after unclamping. The Titanium Grade 2 condition must be included in the same inspection decision.
Technical Context
A rotating tubular electrode feeds toward the workpiece while dielectric is pumped through its center. At 20–50 mm, Depth-to-diameter ratio becomes the main control. The electrode wears shorter and smaller as it advances, flushing pressure must carry debris through a long tube, and the exit can wander. Use guides, staged electrodes, and separate entry/exit position and diameter inspection. Control electrode runout, guides, through-electrode flushing, breakthrough support, and entry-versus-exit inspection. For Titanium Grade 2, the supplied condition still determines support and surface acceptance.
Small Hole EDM Capability Reference
| What you're asking | What you can expect |
|---|---|
| Feature types | small through holes, deep holes, angled holes, cooling holes, vent holes, and start holes in hard or heat-resistant alloys |
| Tolerance | ±0.010–0.050 mm |
| Surface finish | Hole-wall finish is feature-dependent |
| Typical diameter | About 0.3–3.0 mm for ordinary planning |
| Depth driver | Depth-to-diameter ratio, straightness, and breakthrough |
| Main limitation | Very small diameter combined with extreme depth may require specialized equipment, staged electrodes, and dedicated metrology. |
Thickness Range Reference
| Thickness or depth input | What it means for this process |
|---|---|
| 20–50 mm | Through-hole depth can create a moderate aspect ratio; flushing pressure, straightness and breakthrough must be planned together. |
| Primary controls | Plan electrode diameter, path depth, angle, flushing pressure, rotation, straightness, and entrance and exit conditions. |
Material Condition Reference
| Condition | What to expect | Watch out for | Surface notes |
|---|---|---|---|
| annealed | Use stable support and low-energy finishing. | Thermal surface effects can reduce fatigue resistance. | Specify recast and edge condition on fatigue and medical faces. |
| stress-relieved | Plan around stress relief and thin-wall movement. | Residual stress can distort delicate profiles. | Use trim passes and controlled post-processing on critical faces. |
Thickness Impact
Titanium Grade 2 is a commercially pure titanium grade with lower strength and higher ductility than alpha-beta Grade 5. In the 20–50 mm setup, limit aggressive energy on fatigue faces, control recast or contamination, and keep post-process cleanliness explicit. The material condition changes support and surface response, while Small Hole EDM determines how the feature is accessed and controlled.
Surface and Edge Control
For Small Hole EDM on Titanium Grade 2 at 20–50 mm, inspect the functional face or edge from its own datum. Use low-energy finishing and define whether recast removal, polishing or passivation is required. Keep texture, edge condition, recast, corrosion protection, and post-processing as separate acceptance items when service requires them.
Titanium Grade 2 Small Hole EDM Thickness Checkpoints
- Show the actual true hole path depth represented by 20–50 mm, not only the outside part size.
- Plan electrode diameter, path depth, angle, flushing pressure, rotation, straightness, and entrance and exit conditions.
- Mark the functional tolerance, finish, datum, and inspection method on the drawing.
Limits and Better Alternatives
Main Limit
The 20–50 mm label cannot replace the real hole diameter, depth, depth-to-diameter ratio, straightness, breakthrough and flushing or the supplied Titanium Grade 2 condition. Thin sections can move and corrosion or medical surfaces need selective recast removal and cleanliness.
Consider Another Route When
Use mechanical drilling for accessible easy-cutting material, laser drilling for suitable thin high-volume parts, or Micro EDM for smaller precision features.
Practical Next Step
Send the Titanium Grade 2 drawing with its condition, the actual true hole path depth in the 20–50 mm range, feature geometry, controlled tolerance, surface requirement, quantity, and inspection method.
Practical Takeaway
For Titanium Grade 2 at 20–50 mm, plan Small Hole EDM from the real feature axis, support, debris control, and inspection method instead of treating the range as a blanket capability statement.
Additional Project Information
Include application, destination and end-use notes together with the material, quantity and drawing requirements.
Project Details for Technical Review
Include application and end-use notes when they affect material, inspection, documentation, or export review.
- Process: Small Hole EDM
- Material: Titanium Grade 2
- Thickness: 20–50 mm
- Drawing or part sketch
- Material grade
- Thickness / part size
- Quantity
- Tolerance and critical dimensions
- Surface finish or inspection requirement
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
Does 20–50 mm alone define Small Hole EDM capability?
No. It only describes one setup dimension. Final capability follows the actual hole diameter, depth, depth-to-diameter ratio, straightness, breakthrough and flushing, material condition, access, datum, and inspection method.
What controls the setup in this range?
The main controls are electrode diameter, true path depth, aspect ratio, flushing, rotation, straightness, and breakthrough support. Their importance changes with the real feature geometry rather than the nominal range label.
What should be watched on Titanium Grade 2?
A dimensionally correct feature can still be rejected for recast, contamination, or fatigue-sensitive edge damage Use limit aggressive energy on fatigue faces, control recast or contamination, and keep post-process cleanliness explicit and release only the functional dimensions and faces that have a defined acceptance method.
What should the drawing identify?
Show the true feature path or section represented by 20–50 mm, the Titanium Grade 2 condition, controlled datum, tolerance, finish, quantity, and inspection route.